Schneider Electric LULC033 Modbus communication module.
Schneider Electric LULC033 Modbus communication module.
| Manufacturer part number (MPN) | LULC033 |
| EAN / GTIN | 3389119202091 |
| Sales unit | pcs |
| Package quantity | 40 pcs |
| Range | TeSys |
| Device short name | LUL |
| Product or component type | Communication module |
| Product compatibility | LUCL; LUCC; LUCB; LUCM; LUCA; LUCD |
| Device application | Communication |
| Range compatibility | TeSys TeSys U LUB non reversing power base; TeSys TeSys U LU2B reversing power base |
| main function available | Communication module |
| mounting mode | Plug-in |
| Mounting location | Front side |
| Physical interface | RS485 multidrop |
| Bus type | Modbus |
| Cable connector type | RJ45 front panel |
| Communication port protocol | Modbus RTU |
| Addressing | 0...31 |
| Transmission rate | 19200 bit/s |
| Return time | 30 ms |
| Number of inputs | 2 |
| Logic input | Positive at 24 V DC - 7 mA |
| Response time | 10 ms +/- 30 % change to state 0; 10 ms +/- 30 % change to state 1 |
| Input type | Resistive |
| Number of outputs | 2 dedicated to starter-controller coil operation; 1 |
| [Us] rated supply voltage | 24 V DC |
| Output current | <= 500 mA |
| Protection type | GG fuse 1 A |
| Switching current capacity | 0.5 mA at 24 V |
| Local signalling | 3 LEDs front panel |
| Connection pitch | 3.81 mm |
| Connections - terminals | Screw clamp terminals 1 cable(s) 0.14…1 mm²flexible without cable end; Screw clamp terminals 1 cable(s) 0.14…1 mm²rigid without cable end; Screw clamp terminals 1 cable(s) 0.25…0.5 mm²flexible with cable end; Screw clamp terminals 1 cable(s) 0.25…1 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 0.14…0.5 mm²rigid without cable end; Screw clamp terminals 2 cable(s) 0.14…0.75 mm²flexible without cable end; Screw clamp terminals 2 cable(s) 0.25…0.34 mm²flexible with cable end; Screw clamp terminals 2 cable(s) 0.5 mm²flexible with cable end |
| Associated cable type | AWG 26...AWG 16 |
| Tightening torque | 0.2…0.25 N.m2.5 mm |
| Product weight | 0.08 kg |
| Ambient air temperature for operation | -25…55 °C |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.9 cm |
| Package 1 Width | 11.3 cm |
| Package 1 Length | 4.9 cm |
| Package 1 Weight | 85.0 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 35 |
| Package 2 Height | 15.0 cm |
| Package 2 Width | 30.0 cm |
| Package 2 Length | 40.0 cm |
| Package 2 Weight | 3.293 kg |
| Country of origin | FR |
| Warranty (in months) | 18 |
| Supporting protocol for EtherCAT | No |
| Voltage type (supply voltage) | DC |
| Supporting protocol for TCP/IP | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | Yes |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | Yes |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard eGPRS | No |
| Radio standard GSM | No |
| Radio standard LTE | No |
| Mobile communications standard 3G (UMTS) | No |
| IO link master | No |
| System accessory | Yes |
| Degree of protection (IP) | IP20 |
| With potential separation | Yes |
| Fieldbus connection over separate bus coupler possible | No |
| Suitable for rail mounting | No |
| Wall mounting/direct mounting | No |
| Front built-in possible | Yes |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| SIL according to IEC 61508 | None |
| Performance level according to EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Width | 45 mm |
| Height | 45 mm |
| Depth | 95 mm |
| MOQ | 1 |