Han 24B connector housing (pin) on Han 24B connector housing (socket), single locking lever, angled at both ends, TPE, flame-retardant
Han 24B connector housing (pin) on Han 24B connector housing (socket), single locking lever, angled at both ends, TPE, flame-retardant
| Manufacturer part number (MPN) | MAT90489454 |
| Brand | IGUS |
| Category | Tools |
| Connector A | Socket M32 insert 24+PE lateral Cable entry |
| Connector B | Connector M32 insert 24+PE lateral Cable entry |
| Insert 1 HARTING Part No. | 09330242702 |
| Insert 2 HARTING Part No. | 09330242602 |
| Housing 1 HARTING Part No. | 19300241542 |
| Housing series | Han 24B |
| Connector design | cable entry angled on both sides |
| Locking type | single locking lever |
| Number of cores and conductor nominal cross-section | 25G1.5 |
| Copper index kg/km | 371 kg/km |
| Shipping weight (kg or kg/m) | 0.749128 |
| Outer diameter (d) max. mm | 19 mm |
| Weight per km | 650 kg/km |
| Min. bend radius, e-chain (factor) | 5 x d |
| Min. bend radius, e-chain | 95 mm |
| Min. bend radius, flexible (factor) | 4 x d |
| Min. bend radius, flexible | 76 mm |
| Min. bend radius, fixed (factor) | 3 x d |
| Min. bend radius, fixed | 57 mm |
| Temperature e-chain® | -35°C up to +100°C |
| Temperature, flexible | -45°C to +100°C (according to DIN EN 60811-504) |
| Temperature, fixed | -55°C to +100°C (according to DIN EN 50305) |
| v max. unsupported (speed) | 10 m/s |
| v max. gliding (speed) | 6 m/s |
| a max. (acceleration) | 100 m/s² |
| travel length | Travels up to 400 m and more |
| v max., twisted (speed) | 90 °/m |
| torsion | Torsion ±90°, with 1m cable length, Class 2 |
| Conductor | Stranded conductor in an especially bend-resistant version consisting of bare copper wires (according to DIN EN 60228). |
| Core insulation | Mechanically high-quality TPE mixture. |
| Core stranding | Cores wound in bundles are then wound around a high tensile strength centre element, all with optimised short pitch lengths and directions. Especially low-torsion structure. |
| Outer jacket | Low-adhesion, extremely abrasion-resistant and highly flexible TPE mixture, adapted to suit the requirements in e-chains®. |
| Outer jacket colour | Slate grey (comparable to RAL 7015) |
| CFRIP® | Strip cables faster: a tear strip is moulded into the outer jacket |
| Nominal voltage | 300/500V (according to DIN VDE 0298-3) |
| Test voltage | 2000V (according to DIN EN 50395) |
| UV resistance | High |
| Oil resistance | Oil-resistant (according to DIN EN 60811-404), bio-oil-resistant (according to VDMA 24568 with Plantocut 8 S-MB tested by DEA), Class 4 |
| Silicone-free | Free from silicone which can affect paint adhesion (according to PV 3.10.7 – status 1992) |
| EAC | Certificate No. RU C-DE.ME77.B.00300/19 |
| Lead-free | According to 2011/65/EU (RoHs-II/RoHS-III) |
| Cleanroom | According to ISO Class 1 The outer jacket material of this series complies with CF34.UL.25.04.D - tested by IPA according to standard DIN EN ISO 14644-1 |
| CE | According to 2014/35/EU |
| UL/CSA AWM | Style 11886 and 22021, 1000 V, 90 °C |
| UL verified | Certificate no |
| V293650 | "The igus 4-year chainflex cable guarantee and service life calculator based on 2 billion test cycles per year“ |
| Flame-retardant | According to IEC 60332-1-2, Cable Flame, VW-1, FT1, FT2/Horizontal Flame |
| DNV | Type approval certificate TAE00003X2 |
| NFPA | According to NFPA 79-2018, chapter 12.9 |
| UKCA | In accordance with the valid regulations of the United Kingdom (as of 08/2021) |
| MOQ | 1 |