Hach M1100 Luminescent oxygen sensor, in-line — 0-40000 ppb, 12mm standard fitting. Reference part number M1100-S10H.
Hach M1100 Luminescent oxygen sensor, in-line — 0-40000 ppb, 12mm standard fitting. Reference part number M1100-S10H.
| Accuracy | ± 0.02 ppm or 3 % whichever is greater |
| Ambient Temperature | -5 - 100 °C (23 - 212 °F) |
| Application | Beverage (bypass) |
| Calibration | Two points at cap replacement (zero and air), one during use (air) |
| Certifications | 2004/108/EC - EN 61326-1 |
| Display Resolution | 0.1 ppb |
| Fitting Type | 12 mm fitting |
| Flow Rate | 50 - 300 mL/min |
| IP Rating | Sensor resistant to all common CIP methods |
| Lower Limit of Detection (LOD) | 0.015 ppm |
| Material | 316 L Stainless Steel (1.4435), Silicone |
| Operating Conditions | 0 - 95 % non-condensing relative humidity |
| Parameter | Oxygen |
| Power Supply | Universal 85-264 VAC @, 25 VA, 10-36 VDC, 25 W |
| Range | 0 - 40 ppm DO (dissolved oxygen) |
| Repeatability | ± 0.015 ppm or 2 % whichever is greater |
| Reproducibility | ± 0.02 ppm or 3 % whichever is greater |
| Response Time | (90%)< 10 s (gas phase); (90%)< 30 s (beer process) |
| Sample Pressure | 1 - 20 bar absolute |
| Temperature Range | Accurate from -5 - 50 °C (23 - 122 °F); Resistant - temperature from -5 - 100 °C (23 - 212 °F) |
| Warranty | 12 months |
| Weight | M1100 12 mm: 0.6 kg; M1100 28 mm: 0.74 kg |
| Wetted Materials | 316 L Stainless Steel (1.4435), Silicone |
| What's included | Sensor only.; Controller, sensor cable, flow-chamber or process connection must be ordered separately. |
| MOQ | 1 |