Graco XM50 System, Hazardous Location, 240V, Alternator Power, Explosion Proof Viscon HP Heaters, No Junction Box, No Feed System

Part Number
XM1E00 · HS 8424.20

Graco XM1E00 XM50 System, Hazardous Location, 240V, Alternator Power, Explosion Proof Viscon HP Heaters, No Junction Box, No Feed System, part number XM1E00. Plural Component (XM50). Mix ratio 1:1-10:1. Maximum working pressure 5200 psi (358 bar); maximum fluid flow 3 gpm (11.4 lpm). Compatible material: Primer, Polyurethane, Two-Component Coating, Solvents, Epoxy. Wetted parts: Aluminum, Stainless Steel, Carbide, UHMWPE, PTFE, Nylon, Carbon Steel, Alloy Steel, Zinc Plating, Nickel Plating, Ductile Iron, Tungsten Carbide, Polyethylene, Leather, Polypropylene. Includes: Whip Hose, Static Mixer, XTR Spray Gun. All values read from the Graco product page (XM1E00 on graco.com).

Technical Specifications

Brand

Graco Model: XM50 Part number: XM1E00 Maximum working pressure: 5200 psi (358 bar) Maximum flow rate: 3 gpm (11.4 lpm) Product type: Plural Component Type: Plural Component Sprayer Component type: Plural-Component Measuring type: Electronic Positive Displacement Gun type: Airless Gun Compatible material: Primer, Polyurethane, Two-Component Coating, Solvents

Epoxy Flush type

Solvent minimum mix ratio: 1:1 Maximum mix ratio: 10:1 Mix accuracy: 5% Number of tanks: 0 Feed pumps: None 20 gal heated hopper method: None Power source: Alternator Air inlet size: 3/4 in

Female NPT Sound pressure level

84.8 at 70psi (0.48 MPa, 4.8 bar) dB(A) Overall height: 70 in

Wetted material

Aluminum, Stainless Steel, Carbide, UHMWPE, PTFE, Nylon, Carbon Steel, Alloy Steel, Zinc Plating, Nickel Plating, Ductile Iron, Tungsten Carbide, Polyethylene, Leather

Polypropylene Includes

Whip Hose, Static Mixer

XTR Spray Gun Voltage

240 V

Compatibility

XM is Graco's plural-component (two-component) proportioning spray line for protective coatings and materials. The 1:1-10:1 mix ratio range and compatibility with primer, polyurethane, two-component coating, solvents, epoxy determine which coatings this configuration handles. This configuration includes: Whip Hose, Static Mixer, XTR Spray Gun. Confirm the electrical supply (phase/voltage), hopper/feed configuration and gun/tip suit the coating before ordering.

Material	Aluminum, Stainless Steel, Carbide, UHMWPE, PTFE, Nylon, Carbon Steel, Alloy Steel, Zinc Plating, Nickel Plating, Ductile Iron, Tungsten Carbide, Polyethylene, Leather, Polypropylene
Pressure rating	5200 psi (358 bar) max working
MOQ	1

Graco XM50 System, Hazardous Location, 240V, Alternator Power, Explosion Proof Viscon HP Heaters, No Junction Box, No Feed System

Technical Specifications

Properties

Compatibility

Attached Documents