cBallast
Industrial Parts Catalog
Datasheet generated 2026-10-07
sales@cballast.com
cballast.com

Graco RAC X FF LP SwitchTip fine-finish low-pressure reversible airless spray tip, 0.012 in. orifice, 8 in. fan width

Graco · Tools & Workshop Consumables · Spray Tips · USA · graco.com
Part Number
FFLP412  ·  HS 8424.90
Graco RAC X FF LP SwitchTip fine-finish low-pressure reversible airless spray tip, 0.012 in. orifice, 8 in. fan width

Graco FFLP412 RAC X FF LP (Fine Finish Low Pressure) SwitchTip, a reversible (clog-clearing) fine-finish airless spray tip, part number FFLP412, with a tungsten carbide orifice of 0.012 in. (0.3 mm) and a 8 in. (254 mm) spray fan width. The FF LP design lets the operator spray fine-finish materials at up to 50% lower pressure for a softer spray pattern. Maximum working pressure 4050 psi (280 bar). The Graco tip number 412 encodes the size: the first digit (4) doubled gives the 8 in. fan width and the last two digits (12) give the 0.012 in. orifice. For use with the RAC X HandTite Tip Guard.

Technical Specifications

BrandGraco
RangeRAC X FF LP SwitchTip (Fine Finish Low Pressure series) — reversible airless spray tip
Part numberFFLP412
Tip number meaningfirst digit 4 x 2 = 8 in. fan width; last two digits 12 = 0.012 in. orifice
Orifice diameter0.012 in. (0.3 mm)
Spray fan width8 in. (254 mm)
Pattern size8 to 10 in
Maximum flow rate0.15 gpm
Maximum working pressure4050 psi (280 bar)
Orifice materialtungsten carbide
Tip typeairless (fine finish, low pressure)
Compatible materials (per the Graco product page)Primer, Stain, Varnish, Water-Based Paint, Enamel, Latex, Solventborne Paints
For use withRAC X HandTite Tip Guard

Properties

MaterialTungsten carbide (orifice)
Pressure rating4050 psi (280 bar)
MOQ1

Compatibility

RAC X FF LP SwitchTip, FFLP series — fits Graco RAC X HandTite tip guards and the airless guns/sprayers that accept the RAC X guard. The reversible design lets the tip be rotated to clear a clog without removing it. Fine-finish tip sizes are selected by material and required fan width; confirm the gun/guard accepts the RAC X guard before ordering.

Attached Documents