Graco AirPro Conventional air spray gun, gravity feed, 0.055 in. (1.4 mm) fluid nozzle, plastic gravity cup

Part Number
289011 · HS 8424.20

Graco 289011 AirPro Conventional air spray gun, part number 289011, a gravity feed hand-held finishing spray gun with a 0.055 in. (1.4 mm) fluid nozzle and plastic gravity cup. Maximum fluid pressure 300 psi (2.1 MPa); maximum air pressure 100 psi (0.7 MPa). Conventional air-spray technology. Listed compatible coatings: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne. Supplied with: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup. All values read from the Graco product page (289011 on graco.com).

Technical Specifications

Brand

Graco

Model

AirPro air spray gun

Part number

289011

Gun technology

Conventional

Feed type

Gravity Feed

Fluid orifice (nozzle) size

0.055 in. (1.4 mm)

Cup option

Plastic Gravity Cup

Maximum fluid pressure

300 psi (2.1 MPa)

Maximum air pressure

100 psi (0.7 MPa)

Maximum fluid temperature

109 °F

Fluid inlet size

3/8 in.

Air inlet size

1/4 in.

Bleed type

Non-Bleeder

Application

Specialty

Compatible material

CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne

Includes

Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Compatibility

AirPro is Graco's air-spray finishing gun family. This gravity feed Conventional configuration is selected by coating type and required finish; the 0.055 in. fluid nozzle is matched to coating viscosity and flow. Air cap, needle and nozzle are supplied as a matched set per the Includes list. Confirm the air and fluid supply, and the cup option, suit the application before ordering.

Pressure rating	300 psi (2.1 MPa) max fluid
Temperature range	Up to 109 °F fluid
MOQ	1

Graco AirPro Conventional air spray gun, gravity feed, 0.055 in. (1.4 mm) fluid nozzle, plastic gravity cup

Technical Specifications

Properties

Compatibility

Attached Documents