Graco AirPro HVLP air spray gun, gravity feed, 0.055 in. (1.4 mm) fluid nozzle

Part Number
289005 · HS 8424.20

Graco 289005 AirPro HVLP air spray gun, part number 289005, a gravity feed hand-held finishing spray gun with a 0.055 in. (1.4 mm) fluid nozzle supplied without a cup. Maximum fluid pressure 300 psi (2.1 MPa); maximum air pressure 100 psi (0.7 MPa). HVLP air-spray technology. Listed compatible coatings: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne. Supplied with: Air Cap, Needle Assembly, Nozzle, Tool Kit. All values read from the Graco product page (289005 on graco.com).

Technical Specifications

Brand

Graco

Model

AirPro air spray gun

Part number

289005

Gun technology

HVLP

Feed type

Gravity Feed

Fluid orifice (nozzle) size

0.055 in. (1.4 mm)

Cup option

without Cup

Maximum fluid pressure

300 psi (2.1 MPa)

Maximum air pressure

100 psi (0.7 MPa)

Maximum fluid temperature

109 °F

Fluid inlet size

3/8 in.

Air inlet size

1/4 in.

Bleed type

Non-Bleeder

Application

Specialty

Compatible material

CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne

Includes

Air Cap, Needle Assembly, Nozzle, Tool Kit

Compatibility

AirPro is Graco's air-spray finishing gun family. This gravity feed HVLP configuration is selected by coating type and required finish; the 0.055 in. fluid nozzle is matched to coating viscosity and flow. Air cap, needle and nozzle are supplied as a matched set per the Includes list. Confirm the air and fluid supply, and the cup option, suit the application before ordering.

Pressure rating	300 psi (2.1 MPa) max fluid
Temperature range	Up to 109 °F fluid
MOQ	1

Graco AirPro HVLP air spray gun, gravity feed, 0.055 in. (1.4 mm) fluid nozzle

Technical Specifications

Properties

Compatibility

Attached Documents