Graco AirPro HVLP air spray gun, pressure feed, 0.030 in. (0.8 mm) fluid nozzle, for waterborne applications

Part Number
288967 · HS 8424.20

Graco 288967 AirPro HVLP air spray gun, part number 288967, a pressure feed hand-held finishing spray gun with a 0.030 in. (0.8 mm) fluid nozzle, for waterborne applications. Maximum fluid pressure 300 psi (2.1 MPa); maximum air pressure 100 psi (0.7 MPa). HVLP air-spray technology. Listed compatible coatings: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne. Supplied with: Air Cap, Needle Assembly, Nozzle, Tool Kit. All values read from the Graco product page (288967 on graco.com).

Technical Specifications

Brand

Graco

Model

AirPro air spray gun

Part number

288967

Gun technology

HVLP

Feed type

Pressure Feed

Fluid orifice (nozzle) size

0.030 in. (0.8 mm)

Maximum fluid pressure

300 psi (2.1 MPa)

Maximum air pressure

100 psi (0.7 MPa)

Maximum fluid temperature

109 °F

Fluid inlet size

3/8 in.

Air inlet size

1/4 in.

Bleed type

Non-Bleeder

Application

Waterborne

Compatible material

Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne

Includes

Air Cap, Needle Assembly, Nozzle, Tool Kit

Compatibility

AirPro is Graco's air-spray finishing gun family. This pressure feed HVLP configuration is selected by coating type and required finish; the 0.030 in. fluid nozzle is matched to coating viscosity and flow. Air cap, needle and nozzle are supplied as a matched set per the Includes list. Confirm the air and fluid supply suit the application before ordering.

Pressure rating	300 psi (2.1 MPa) max fluid
Temperature range	Up to 109 °F fluid
MOQ	1

Graco AirPro HVLP air spray gun, pressure feed, 0.030 in. (0.8 mm) fluid nozzle, for waterborne applications

Technical Specifications

Properties

Compatibility

Attached Documents