Graco Fine Finish Flat Tip airless spray tip, 0.014 in. orifice, 10 in. fan width

Part Number
163514 · HS 8424.90

Graco 163514 Fine Finish Flat Tip, a non-reversible airless spray tip, part number 163514, with a 0.014 in. (0.36 mm) orifice and a 10 in. (254 mm) spray fan width (pattern size 10 to 12 in.). Maximum working pressure 3000 psi (207 bar), maximum flow rate 0.21 gpm (0.79 L/min). The flat tip number 514 encodes the size: the first digit (5) doubled gives the 10 in. fan width and the last two digits (14) give the 0.014 in. orifice. Suited to lacquer, varnish, urethane, fine finish material. For use with Silver Plus Airless Spray Gun.

Technical Specifications

Brand

Graco

Range

Fine Finish Flat Tip — non-reversible airless spray tip

Part number

163514

Tip number meaning

first digit 5 x 2 = 10 in. fan width; last two digits 14 = 0.014 in. orifice

Orifice diameter

0.014 in. (0.36 mm)

Spray fan width

10 in. (254 mm)

Pattern size

10 to 12 in.

Maximum flow rate

0.21 gpm (0.79 L/min)

Maximum working pressure

3000 psi (207 bar)

Spray pattern

Fan

Compatible material

Lacquer, Varnish, Urethane, Fine Finish Material

Tip type

airless (flat, non-reversible)

For use with

Silver Plus Airless Spray Gun

Compatibility

Fine Finish Flat Tip — a fixed (non-reversible) flat airless tip for fine-finish coatings that fits the Graco flat-tip guard on Silver Plus Airless Spray Gun. Tip size is selected by material and required fan width; the first code digit sets the fan width and the last two set the orifice. Confirm the gun and tip guard accept a Graco flat tip before ordering.

Graco Fine Finish Flat Tip airless spray tip, 0.014 in. orifice, 10 in. fan width

Technical Specifications

Properties

Compatibility

Attached Documents