The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.
The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.
| Manufacturer part number (MPN) | 3070404 Brand: Fluke Category: Tools Power requirements: 85 V ac to 264 V ac, 47 Hz to 440 Hz, 22 VA max consumption Normal operating temperature range: 18 °C to 28 °C (64 °F to 82 °F) Weight: Instrument platform with no mass loaded: 13 kg (28 lb) PG terminal 1.4 kg (3 lb) Dimensions: Instrument platform (HxWxD): 36 cm x 40 cm x 35 cm (14.5 in x 15.8 in x 13.8 in) Height: Top of mounting post with piston-cylinder module installed PG terminal (HxWxD): 12 cm x 15 cm x 20 cm (4.7 in x 5.9 in x 7.9 in) Communications ports: RS-232 COM1: Host computer COM2: AMH automated mass handler, external barometer COM3: Automated pressure controller IEEE-488.2: Host computer Maximum pressure ranges: Actual range depends on piston-cylinder and mass set selection |
| Operating media | Gas Operation: air, nitrogen Oil Operation: ethyl hexyl Sebacate (oil) Maximum mass load: 100 kg Pressure connections: Test port: DH500 Note: DH200 and DH500 are gland and collar type fittings for 1/4 in (6 mm) coned and left hand threaded tube. DH200 is equivalent to AE SF250C, HIP LF4, etc. DH500 is equivalent to AE F250C, HIP HF4, etc |
| CE conformance | Available, must be specified Mass set specifications: All masses are delivered in molded, reusable transit cases with custom inserts |
| Masses | material: 304L non-magnetic stainless steel Finish: Electropolished Adjustment tolerance: ± 20 ppm of nominal value Accuracy of measured values: ± 5 ppm or 1 mg, whichever is greater Traceability of measured values: National Institute of Standards and Technology (NIST) Piston-Cylinder Temperature: Range: 0 to 40 degrees C Resolution: 0.01 degrees C Accuracy: ± 0.1 degrees C Ambient Temperature: Range: 0 to 40 degrees C Resolution: 0.1 degrees C Accuracy: ± 1 degrees C Barometric pressure with internal sensor: Range: 70 kPa to 110 kPa Resolution: 10 Pa Accuracy: ± 140 Pa Barometric pressure can also be read automatically from any RS-232 device such as DHI RPM4 Relative humidity: Range: 5 % to 95 % RH Resolution: 1 % RH Accuracy: ± 10 % RH Piston position: Range: ± 4.5 mm Resolution: 0.1 mm Piston rotation (rate and deceleration): Range: 2 to 150 rpm Resolution: 1 rpm Pressure measurement uncertainty: Typical pressure measurement uncertainty All sources of uncertainty under typical operating conditions are identified, quantified and combined following ISO/TAG4/WG3. The result is rounded upwards to provide conservative global uncertainty figures for the typical user under typical conditions |
| MOQ | 1 |