Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5 A AC current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers.
Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5 A AC current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers.
| Manufacturer part number (MPN) | 2508467 |
| Brand | Fluke |
| Category | Tools |
| Nominal current range | 5 A |
| Continuous current range | 10 mA to 6 A |
| Maximum Non-Destructive Current | 70 A |
| Lowest measurable current | 10 mA |
| Basic Accuracy 10 mA to 1 A | 1% + 5 mA |
| Basic Accuracy 1 A to 5 A | 1% |
| Useable frequency | 40 Hz to 5 kHz |
| Output level(s) | 400 mV/A |
| Input Load Impedance | > 1 MΩ in parallel with up to 47 pF |
| Crest Factor | ≤ 3, add 0.7% to accuracy |
| Safety | CAT III 600 V per IEC/EN61010-1, Pollution Degree 2 |
| Maximum voltage | 600 V AC |
| Warranty | 1 year |
| Maximum conductor diameter | 15 mm |
| Output cable length | 2.5 m |
| BNC Adapter | Yes |
| BNC to banana adapter included | No |
| MOQ | 1 |