Eaton XNE-8AI-U/I-4PT/NI Analogmodul 8 analoge in.
Eaton XNE-8AI-U/I-4PT/NI Analogmodul 8 analoge in.
| Manufacturer part number (MPN) | XNE-8AI-U/I-4PT/NI |
| EAN / GTIN | 7640130095311 |
| Sales unit | pcs |
| Eaton catalogue number | 140037 |
| Depth | 161.5 mm |
| Height | 74.5 mm |
| Width | 13 mm |
| Weight | 0.064 kg |
| Certifications | IEC/EN 61131-2; CE; Rated data for terminations according to IEC/EN 60947-7-1; IEC/EN 61000-6-4; IEC/EN 6113-2; cULus; IEC/EN 61000-6-2 |
| Drop and topple | According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
| Shock resistance | Continuous according to IEC/EN 60068-2-29; Mechanical, According to IEC/EN 60068-2-27 |
| Vibration resistance | According to IEC/EN 60068-2-6 |
| Ambient operating temperature - max | 55 °C |
| Ambient storage temperature - max | 85 °C |
| Ambient operating temperature - min | 0 °C |
| Ambient storage temperature - min | -25 °C |
| Environmental conditions | Harmful gasses - SO2: 10 ppm (relative humidity < 75%, no condensation); Harmful gasses - H2S: 1 ppm (relative humidity < 75%, no condensation) |
| Relative humidity | 5 - 95 % (indoor, Level RH-2, non-condensing for storage at 45°C) |
| Connection | Connection of sensor types Pt100, Pt200, Pt500, Pt1000 and Ni100, Ni1000, NI1000TK5000 in 2- or 3-wire circuit |
| Connection type | Push-In spring-cage terminals, Connection design in TOP direction |
| Protocol | Other bus systems |
| Equipment heat dissipation, current-dependent Pvid | 1.5 W |
| Static heat dissipation, non-current-dependent Pvs | 1.5 W |
| Rated operational voltage | 24 V DC (supply terminal) |
| Supply voltage at DC - max | 28.8 VDC |
| Supply voltage at DC - min | 20.4 VDC |
| Air discharge | According to EN 61100-4-2 |
| Burst impulse | According to IEC/EN 61000-4-4 |
| Contact discharge | According to EN 61100-4-2 |
| Electromagnetic fields | According to IEC EN 61100-4-2 |
| Emitted interference | 230 - 1000 MHz (radiated, high frequency, according to EN 55016-2-3); 30 - 230 MHz (radiated, high frequency, according to EN 55016-2-3) |
| Radiated RFI | IEC/EN 61100-4-6 |
| Surge rating | According to IEC/EN 61000-4-5 Level 4 |
| Voltage dips | According to EN 61131-2 (Voltage fluctuations/voltage dips) |
| Electric connection type | Plug-in connection |
| Features | Analog outputs configurable; Input, voltage; Input, resistor; Fieldbus connection over separate bus coupler possible; Input signal, configurable; Input, current; Analog inputs configurable; Input, resistance thermometer |
| Fitted with | Connectable nickel sensors: Ni100, Ni1000 (according to DIN 43760); Connectable platinum sensors: Pt100, Pt500, Pt1000 (according to DIN IEC 751) |
| Functions | Diagnosis function |
| Current consumption | 30 mA, from module bus, Analog input modules; 35 mA, from supply terminal |
| Degree of protection | IP20; NEMA 1 |
| Limit frequency | 1.5 Hz (- 3 db) |
| Mounting method | Rail mounting possible |
| Product category | XNE Slice module |
| Type | XI/ON I/O module |
| Voltage type | DC |
| Number of channels | 8 (U/I) |
| Input | 8 Analog input U/I; 4 Analog inputs PT/NI |
| Input current | 40 mA (Analog input); 0/4 - 20 mA (Analog input) |
| Input impedance | < 62 kΩ; ≥ 200 kΩ |
| Input voltage | Max. 20 V DC; -10/0 - 10 V DC (Analog input modules) |
| Measured value representation | 12-bit full range, flush left; 16-bit signed integer; Standard/extended range/PA (NE43) |
| Measured variables | Current; Temperature (PT, NI); Resistance; Voltage |
| Number of inputs (analog) | 8 |
| Number of outputs (analog) | 0 |
| Timing cycle | 0.1 % Offset error |
| Explosion safety category for dust | None |
| Explosion safety category for gas | None |
| Potential isolation | Through optocoupler: yes |
| Gauge pin | A1 (according to IEC/EN 60947-1) |
| Stripping length (main cable) | 8 mm |
| Terminal capacity | 0.25 - 1.5 mm², flexible without ferrule, H07V-K; 0.25 - 1.5 mm², solid, H07V-U; 0.25 - 1.5 mm², with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight); 0.25 - 0.75 mm², with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
| Certified for UL hazardous location division 1 | No |
| Certified for UL hazardous location division 2 | No |
| Certified for UL hazardous location group A (acetylene) | No |
| Certified for UL hazardous location group B (hydrogen) | No |
| Certified for UL hazardous location group C (ethylene) | No |
| Certified for UL hazardous location group D (propane) | No |
| Certified for UL hazardous location group E (metal dusts) | No |
| Certified for UL hazardous location class I | No |
| Certified for UL hazardous location class II | No |
| Certified for UL hazardous location class III | No |
| Supporting protocol for EtherCAT | No |
| Supply voltage DC | 20.4–28.8 V |
| Input, resistor | Yes |
| Input, resistance thermometer | No |
| Input, thermocouple | No |
| Input signal, configurable | Yes |
| Resolution of the analogue inputs | 16 Bit |
| Output, current | No |
| Output, voltage | No |
| Output signal configurable | No |
| Number of analogue inputs | 8 |
| Analogue inputs configurable | Yes |
| Analogue outputs configurable | Yes |
| Number of HW-interfaces other | 1 |
| Supporting protocol for TCP/IP | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | No |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Mobile communications standard 3G (UMTS) | No |
| IO link master | No |
| System accessory | Yes |
| Type of electric connection | Screw-/spring clamp connection |
| Fieldbus connection over separate bus coupler possible | Yes |
| Suitable for rail mounting | Yes |
| Wall mounting/direct mounting | No |
| Front built-in possible | No |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| SIL according to IEC 61508 | None |
| Performance level according to EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Country of origin | Germany |
| MOQ | 1 |