| Manufacturer part number (MPN) | EASY-E4-UC-8RE1 |
| EAN / GTIN | 4015080892786 |
| Sales unit | pcs |
| Eaton catalogue number | 197217 |
| Depth | 58 mm |
| Height | 90 mm |
| Width | 36 mm |
| Weight | 0.125 kg |
| Catalog Notes | fitted with two controlled relays |
| Drop and topple | 50 mm Drop height, Drop to IEC/EN 60068-2-31 |
| Height of fall (IEC/EN 60068-2-32) - max | 0.3 m |
| Mounting position | Vertical; Horizontal |
| Shock resistance | 15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts |
| Vibration resistance | According to IEC/EN 60068-2-6; 10 - 57 Hz, 0.15 mm constant amplitude; 57 - 150 Hz, 2 g constant acceleration |
| Cable length | 100 m, unscreened, Digital inputs 24 V AC; 100 m, unscreened, Digital inputs 24 V DC; 100 m, unscreened, Digital inputs 12 V DC; 40 m (max. per input), Digital inputs 24 V DC |
| Air pressure | 795 - 1080 hPa (operation) |
| Ambient operating temperature - max | 55 °C |
| Ambient storage temperature - max | 70 °C |
| Ambient operating temperature - min | -25 °C |
| Ambient storage temperature - min | -40 °C |
| Environmental conditions | Condensation: prevent with appropriate measures; Clearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Relative humidity | 5 - 95 % (IEC 60068-2-30, IEC 60068-2-78) |
| Connection type | Screw terminal |
| Equipment heat dissipation, current-dependent Pvid | 1 W |
| Static heat dissipation, non-current-dependent Pvs | 2 W |
| Conventional thermal current Ith of auxiliary contacts (1-pole, open) | 5 A |
| Power consumption | 2 W |
| Power loss | 2 W |
| Rated breaking capacity | 300000 Operations at AC-15, 250 V AC, 3 A (600 Ops./h); 200000 Operations at DC-13, 24 V DC, 1 A (500 Ops./h) |
| Rated insulation voltage (Ui) | 240 V |
| Rated operational voltage | Max. 300 V AC; 24 V AC (digital inputs); 12/24 V DC (-15 %/+ 20 % - power supply); Max. 300 V DC; 10.2 - 28.8 V DC; 240 V AC; 24 V DC (digital inputs); 24 V AC (-15 %/+10 % - power supply); 12 V DC (digital inputs); 20.4 - 26.4 V AC |
| Supply frequency | 50/60 Hz (± 5%) |
| Supply voltage at AC |
| 50 Hz - max | 264 VAC |
| Supply voltage at AC |
| 50 Hz - min | 85 VAC |
| Supply voltage at DC - max | 28.8 VDC |
| Supply voltage at DC - min | 10.2 VDC |
| Uninterrupted current | 8 A DC, at 24 V DC (UL/CSA); 10 A AC, at 240 V AC (UL/CSA); 1 A DC, at R 300 (UL/CSA); 5 A AC, max. thermal continuous current cos ϕ = 1 at B 300 (UL/CSA) |
| Air discharge | 8 kV |
| Burst impulse | 2 kV, Signal cable; 2 kV, Supply cable; According to IEC/EN 61000-4-4 |
| Contact discharge | 6 kV |
| Electromagnetic fields | 1 V/m at 2.0 - 2.7 GHz (according to IEC EN 61000-4-3); 3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3); 10 V/m at 0.8 - 1.0 GHz (according to IEC EN 61000-4-3) |
| Immunity to line-conducted interference | 10 V (according to IEC/EN 61000-4-6) |
| Radio interference class | Class B (EN 61000-6-3) |
| Surge rating | 2 kV, Supply cables, asymmetrical, power pulses (Surge), EMC; 1 kV, Supply cables, symmetrical, power pulses (Surge), EMC; According to IEC/EN 61000-4-5, power pulses (Surge), EMC |
| Voltage dips | ≤ 1 ms from rated voltage (12 V DC); 10 ms |
| Features | Expandable; Expansion device |
| Fitted with | Relay output |
| Indication | LCD-display base unit used as status indication of Digital inputs 12 V DC; LCD-display base unit used as status indication of Digital inputs 24 V DC |
| Degree of protection | IP20 |
| Input frequency | 50/60 Hz (Digital inputs, at 24 V DC) |
| Insulation resistance | According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Lifespan, mechanical | 10,000,000 Operations |
| Mounting method | Top-hat rail fixing (according to IEC/EN 60715, 35 mm); Rail mounting possible; Screw fixing using fixing brackets ZB4-101-GF1 (accessories); Wall mounting/direct mounting; Front build in possible |
| Overvoltage category | III |
| Pollution degree | 2 |
| Product category | Control relays easyE4 |
| Protection | B16 circuit breaker or 8 A (T) fuse, Protection of an Output relay |
| Protocol | TCP/IP; MODBUS |
| Rated impulse withstand voltage (Uimp) | Relay outputs: 6 kV (contact-coil) |
| Residual ripple | ≤ 5 % |
| Software | EASYSOFT-SWLIC/easySoft |
| Switching frequency | 2 Hz, Resistive load/lamp load, Relay outputs; 10 Hz, Relay outputs; 0.5 Hz, Inductive load, Relay outputs |
| Type | easyE4 extension |
| Utilization category | B 300 Light Pilot Duty, UL/CSA Control Circuit Rating Codes AC; R 300 Light Pilot Duty, UL/CSA Control Circuit Rating Codes DC |
| Voltage type | AC/DC |
| Input current | 3.3 mA (I1 - I4, at 24 V DC, at signal 1); 80 mA |
| Making/breaking capacity | 28/28 VA (DC, at R 300); 3600/360 VA (AC, at B 300) |
| Number of inputs (analog) | 0 |
| Number of inputs (digital) | 4 |
| Number of outputs (analog) | 0 |
| Number of outputs (digital) | 4 |
| Output | Relay outputs in groups of 1; 4 Relay Outputs; > 500 mA (Relay outputs |
| Recommended for load | 12 V AC/DC); Voltage; Current |
| Parallel switching | Not permitted |
| Explosion safety category for dust | None |
| Explosion safety category for gas | None |
| Protection against polarity reversal | Yes, for supply voltage (Siemens MPI optional) |
| Safe isolation | 300 V AC, Between coil and contact, According to EN 50178; 300 V AC, Between two contacts, According to EN 50178 |
| Short-circuit protection | ≥ 1A (T), Fuse, Power supply |
| Screwdriver size | 3.5 x 0.8 mm, Terminal screw |
| Terminal capacity | 0.2 - 4 mm² (AWG 22 - 12), solid; 0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule |
| Tightening torque | 0.6 Nm, Screw terminals |
| Certified for UL hazardous location division 1 | No |
| Certified for UL hazardous location division 2 | Yes |
| Certified for UL hazardous location group A (acetylene) | Yes |
| Certified for UL hazardous location group B (hydrogen) | Yes |
| Certified for UL hazardous location group C (ethylene) | Yes |
| Certified for UL hazardous location group D (propane) | Yes |
| Certified for UL hazardous location group E (metal dusts) | No |
| Certified for UL hazardous location class I | Yes |
| Certified for UL hazardous location class II | No |
| Certified for UL hazardous location class III | No |
| Supporting protocol for EtherCAT | No |
| Supply voltage AC 50 Hz | 85–264 V |
| Supply voltage AC 60 Hz | 85–264 V |
| Supply voltage DC | 10.2–28.8 V |
| Switching current | 5 A |
| Number of digital inputs | 4 |
| Number of digital outputs | 4 |
| With relay output | Yes |
| With optical interface | No |
| Supporting protocol for TCP/IP | Yes |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | Yes |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Mobile communications standard 3G (UMTS) | No |
| IO link master | No |
| Redundancy | No |
| With display | No |
| Basic device | No |
| Expandable | Yes |
| Expansion device | Yes |
| With time switch clock | No |
| Suitable for rail mounting | Yes |
| Wall mounting/direct mounting | Yes |
| Front built-in possible | Yes |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| SIL according to IEC 61508 | None |
| Performance level according to EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Country of origin | Estonia |
