| Manufacturer part number (MPN) | EASY-E4-DC-12TC1 EAN / GTIN: 4015081939466 Sales unit: pcs Eaton catalogue number: 197213 Depth: 58 mm Height: 90 mm Width: 72 mm Weight: 0.2 kg Compliances: Eaton supports the product until its end of life Catalog Notes: Accuracy of the real-time clock depending on ambient air temperature - fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible Drop and topple: 50 mm Drop height, Drop to IEC/EN 60068-2-31 Height of fall (IEC/EN 60068-2-32) - max: 0.3 m Mounting position: Vertical; Horizontal Shock resistance: 15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts Vibration resistance: 10 - 57 Hz, 0.15 mm constant amplitude; 57 - 150 Hz, 2 g constant acceleration; According to IEC/EN 60068-2-6 Cable length: ≤ 30 m, screened, analogue inputs; 100 m, unscreened, digital inputs 24 V DC Cable type: Ethernet: CAT5 Air pressure: 795 - 1080 hPa (operation) Ambient operating temperature - max: 55 °C Ambient storage temperature - max: 70 °C Ambient operating temperature - min: -25 °C Ambient storage temperature - min: -40 °C Environmental conditions: Condensation: prevent with appropriate measures; Clearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 Relative humidity: 5 - 95 % (IEC 60068-2-30 |
| IEC 60068-2-78) Connection type | Screw terminal; Ethernet: RJ45 plug, 8-pole Data transfer rate: 10/100 MBit/s Static heat dissipation, non-current-dependent Pvs: 2 W Conventional thermal current Ith of auxiliary contacts (1-pole, open): 0.5 A Heat dissipation: 3.4 W (at 24 V DC) Inrush current: 12.5 A (for 6 ms) Power consumption: 2 W Power loss: 2 W Rated operational current (Ie): Max. 0.5 A at signal „1” DC per channel Rated operational voltage: 24 V DC (-15 %/+ 20 % - power supply); 24 V DC (transistor outputs); 20.4 - 28.8 V DC (Transistor outputs); 24 V DC (digital inputs); 20.4 - 28.8 V DC Supply current: 24/44 mA, Normally⁄max., On 1 signal, Transistor outputs; 18/32 mA, Normally⁄max., On 0 signal, Transistor outputs Supply voltage at DC - max: 28.8 VDC Supply voltage at DC - min: 20.4 VDC Air discharge: 8 kV Burst impulse: According to IEC/EN 61000-4-4; 2 kV, Supply cable; 2 kV |
| Signal cable Contact discharge | 6 kV Electromagnetic fields: 3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3); 10 V/m at 0.8 - 1.0 GHz (according to IEC EN 61000-4-3); 1 V/m at 2.0 - 2.7 GHz (according to IEC EN 61000-4-3) Immunity to line-conducted interference: 10 V (according to IEC/EN 61000-4-6) Radio interference class: Class B (EN 61000-6-3) Surge rating: 0.5 kV, Supply cables, symmetrical, power pulses (Surge), EMC; According to IEC/EN 61000-4-5, power pulses (Surge), EMC; 1 kV, Supply cables, asymmetrical, power pulses (Surge) |
| EMC Voltage dips | 20 ms; ≤ 10 ms |
| Bridging voltage dips Features | Parallel connection of transistor outputs with resistive load, inductive load with external suppressor circuit, combination within a group - Group 1: Q1 to Q4; Networkable (Ethernet); Expandable; Display indication of 6 lines x 16 characters Fitted with: Keypad; Display; Real time clock; Timer Functions: Thermal cutout Indication: LCD-display used as Output status indication of Transistor outputs; LCD-display used as status indication of digital inputs 24 V DC Degree of protection: IP20 Display temperature - max: 55 °C Display temperature - min: 0 °C Display type: Monochrome Frequency counter: Cable length: ≤ 20 m (screened digital inputs 24 V DC); Number: 4 (I1, I2, I3 I4 - digital inputs 24 V DC); Pulse pause ratio: 1:1 (digital inputs 24 V DC); Pulse shape: Square (digital inputs 24 V DC); Counter frequency: 5 kHz (digital inputs 24 V DC) Insulation resistance: According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 Mounting method: Screw fixing using fixing brackets ZB4-101-GF1 (accessories); Top-hat rail fixing (according to IEC/EN 60715, 35 mm); Front build in possible; Wall mounting/direct mounting; Rail mounting possible Operating frequency: Dependent on the cycle time of the basic device; Dependent on the cycle- and transmission-time of the expansion devices; Depending on the suppressor circuit (Inductive load to EN 60947-5-1, With external suppressor circuit, Max. switching frequency, max. duty factor) Overvoltage category: III Pollution degree: 2 Product category: Control relays easyE4 Protocol: TCP/IP; MODBUS Residual current: 0.1 mA (on signal "1" per channel) Residual ripple: 5 % (transistor outputs); ≤ 5 % Resolution: 1 min (Range H:M) 1 s (Range M:S) 12 Bit (value 0 - 4095, analogue inputs) 5 ms (Range S) Software: EASYSOFT-SWLIC/easySoft Type: easyE4 base device Used with: easyE4 Voltage type: DC Accuracy: ± 2 %, (I5, I6, I7, I8) ± 0.12 V, of actual value, within a single device (analogue Inputs); ± 3 %, of actual value, two easy devices (analogue Inputs); ± 2 s/day, Real-time clock to inputs (± 0.2 h⁄Year); ± 1 %, Repetition accuracy of timing relays (of values) Conversions: Each CPU cycle for analogue inputs Incremental counter: Pulse pause ratio: 1:1; Pulse shape: Square; Value range: -2147483648 to +2147483647; Number of counter inputs: 2 (I1 + I2 I3 + I4); Signal offset: 90°; Counter frequency: ≤ 5 kHz Incremental encoder: Cable length: ≤ 20 m (screened) Input: Voltage (DC) Input current: 1 mA (analogue inputs); 3.3 mA (I1 - I4, at 24 V DC, at signal 1); 2.2 mA (I5 - I8, at 24 V DC, at signal 1); 80 mA Input impedance: 13.3 kΩ Input voltage: Status 0: ≤ 15 V DC (I1 - I4, digital inputs 24 V DC); Status 0: ≤ 8 V DC (I5 - I8, digital inputs 24 V DC); Status 1: ≥ 15 V DC (I1 - I4, digital inputs 24 V DC); Signal 0: ≤ 5 V DC (I1 - I8, digital inputs, 24 V DC) Lamp load: Max. 3 W (without Rv per channel) Number of inputs (analogue): 0; 4 Number of inputs (digital): 8 Number of outputs (analogue): 0 Number of outputs (digital): 4 Output: Parallel connection of max. 4 Transistor outputs; 2 A, Max. total current, Outputs; 4 Transistor Outputs; Voltage; Current Output voltage: U = Uₑ - 1 V (signal 1 at Iₑ = 0.5 A, transistor outputs); Max. 2.5 V (at status 0 per channel, transistor outputs) Rapid counter inputs: Pulse pause ratio: 1:1; Counter frequency: ≤ 10 kHz; Cable length: ≤ 20 m (shielded); Value range: -2147483648 to +2147483647; Pulse shape: Square; Number of rapid counter inputs: 4 (I1, I2, I3 |
| I4) Signal range | 0 - 10 V DC, analogue inputs Explosion safety category for dust: None Explosion safety category for gas: None Protection against polarity reversal: For transistor outputs (Caution: A short circuit will result if 0 V/earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles); Yes, for supply voltage (Siemens MPI optional) Short-circuit current: 6.8 A, Transistor outputs Short-circuit protection: ≥ 1A (T), Fuse, Power supply; Yes, electronic (Q1 - Q4), Transistor outputs Short-circuit tripping current: 0.7 ≤ Ie ≤ 1.7 per output, For Ra ≤ 10 mΩ, Depending on number of active channels and their load |
| Transistor outputs Screwdriver size | 3.5 x 0.8 mm |
| Terminal screw Terminal capacity | 0.2 - 4 mm² (AWG 22 - 12), solid; 0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule Tightening torque: 0.6 Nm, Screw terminals Certified for UL hazardous location division 1: No Certified for UL hazardous location division 2: Yes Certified for UL hazardous location group A (acetylene): Yes Certified for UL hazardous location group B (hydrogen): Yes Certified for UL hazardous location group C (ethylene): Yes Certified for UL hazardous location group D (propane): Yes Certified for UL hazardous location group E (metal dusts): No Certified for UL hazardous location class I: Yes Certified for UL hazardous location class II: No Certified for UL hazardous location class III: No Supporting protocol for EtherCAT: No Supply voltage DC: 20.4–28.8 V Switching current: 0.5 A Number of digital inputs: 8 Number of digital outputs: 4 With relay output: No Number of HW-interfaces industrial Ethernet: 1 With optical interface: No Supporting protocol for TCP/IP: Yes Supporting protocol for PROFIBUS: No Supporting protocol for CAN: No Supporting protocol for INTERBUS: No Supporting protocol for ASI: No Supporting protocol for KNX: No Supporting protocol for Modbus: Yes Supporting protocol for Data-Highway: No Supporting protocol for DeviceNet: No Supporting protocol for SUCONET: No Supporting protocol for LON: No Supporting protocol for PROFINET IO: No Supporting protocol for PROFINET CBA: No Supporting protocol for SERCOS: No Supporting protocol for Foundation Fieldbus: No Supporting protocol for EtherNet/IP: No Supporting protocol for AS-Interface Safety at Work: No Supporting protocol for DeviceNet Safety: No Supporting protocol for INTERBUS-Safety: No Supporting protocol for PROFIsafe: No Supporting protocol for SafetyBUS p: No Supporting protocol for other bus systems: No Radio standard Bluetooth: No Radio standard WLAN 802.11: No Radio standard GPRS: No Radio standard GSM: No Mobile communications standard 3G (UMTS): No IO link master: No Redundancy: No With display: Yes Basic device: Yes Expandable: Yes Expansion device: No With time switch clock: Yes Suitable for rail mounting: Yes Wall mounting/direct mounting: Yes Front built-in possible: Yes Rack-assembly possible: No Suitable for safety functions: No SIL according to IEC 61508: None Performance level according to EN ISO 13849-1: None Appendant operation agent (Ex ia): No Country of origin: Estonia |
