Eaton DILEM-01(110V50HZ,120V60HZ) Contactor, 110 V 50 Hz, 120 V 60 Hz, 3 poles, 400V, 4 kW, Contacts N/C = Normally closed= 1 NC.
Eaton DILEM-01(110V50HZ,120V60HZ) Contactor, 110 V 50 Hz, 120 V 60 Hz, 3 poles, 400V, 4 kW, Contacts N/C = Normally closed= 1 NC.
| Manufacturer part number (MPN) | DILEM-01(110V50HZ,120V60HZ) |
| EAN / GTIN | 4015080517924 |
| HS code | 8536.90 |
| Sales unit | pcs |
| Package quantity | 5 pcs |
| Eaton catalogue number | 051792 |
| Depth | 52 mm |
| Height | 58 mm |
| Width | 45 mm |
| Weight | 0.17 kg |
| Certifications | CSA File No.: 012528; CSA-C22.2 No. 14-05; UL Category Control No.: NLDX; IEC/EN 60947-4-1; CE; UL 508; CSA Class No.: 3211-04; IEC/EN 60947; VDE 0660; CSA; UL File No.: E29096; UL |
| Catalog Notes | Also tested according to AC-3e. |
| Ambient operating temperature - max | 50 °C |
| Ambient storage temperature - max | 80 °C |
| Ambient operating temperature - min | -25 °C |
| Ambient operating temperature (enclosed) - max | 40 °C |
| Ambient operating temperature (enclosed) - min | -25 °C |
| Ambient storage temperature - min | -40 °C |
| Climatic proofing | Damp heat, cyclic, to IEC 60068-2-30; Damp heat, constant, to IEC 60068-2-78 |
| Control circuit reliability | < 2 λ, < 1 failure at 100,000,000 Operations (at Uₑ = 24 V DC, Umin = 17 V, Imin = 5.4 mA) |
| Number of auxiliary contacts (normally closed contacts) | 1 |
| Number of auxiliary contacts (normally open contacts) | 0 |
| Conventional thermal current Ith (1-pole, enclosed) | 40 A |
| Conventional thermal current Ith (3-pole, enclosed) | 16 A |
| Conventional thermal current Ith at 55°C (3-pole, open) | 19 A |
| Conventional thermal current Ith of auxiliary contacts (1-pole, open) | 10 A |
| Conventional thermal current Ith of main contacts (1-pole, open) | 50 A |
| Equipment heat dissipation, current-dependent Pvid | 1.2 W |
| Heat dissipation capacity Pdiss | 0 W |
| Heat dissipation per pole, current-dependent Pvid | 0.4 W |
| Rated operational current for specified heat dissipation (In) | 9 A |
| Static heat dissipation, non-current-dependent Pvs | 1.8 W |
| Rated breaking capacity at 220/230 V | 90 A |
| Rated breaking capacity at 380/400 V | 90 A |
| Rated breaking capacity at 500 V | 64 A |
| Rated breaking capacity at 660/690 V | 42 A |
| Rated insulation voltage (Ui) | 690 V |
| Rated making capacity up to 440 V (cos phi to IEC/EN 60947) | 110 A |
| Rated operational current (Ie) | 0.5 A at 220 V, DC L/R ≤ 15 ms (with 3 contacts in series); 1.5 A at 100 V, DC L/R ≤ 15 ms (with 3 contacts in series); 2.5 A at 24 V, DC L/R ≤ 15 ms (with 1 contact in series); 2.5 A at 60 V, DC L/R ≤ 15 ms (with 2 contacts in series) |
| Rated operational current (Ie) at AC-1, 380 V, 400 V | |
| 415 V | 22 A |
| Rated operational current (Ie) at AC-15, 220 V, 230 V | |
| 240 V | 6 A |
| Rated operational current (Ie) at AC-15, 380 V, 400 V | |
| 415 V | 3 A |
| Rated operational current (Ie) at AC-15 | |
| 500 V | 1.5 A |
| Rated operational current (Ie) at AC-3, 220 V, 230 V | |
| 240 V | 9 A |
| Rated operational current (Ie) at AC-3, 380 V, 400 V | |
| 415 V | 9 A |
| Rated operational current (Ie) at AC-3 | |
| 440 V | 9 A |
| Rated operational current (Ie) at AC-3 | |
| 500 V | 6.4 A |
| Rated operational current (Ie) at AC-3, 660 V | |
| 690 V | 4.8 A |
| Rated operational current (Ie) at AC-4, 220 V, 230 V | |
| 240 V | 6.6 A |
| Rated operational current (Ie) at AC-4 | |
| 440 V | 6.6 A |
| Rated operational current (Ie) at AC-4 | |
| 500 V | 5 A |
| Rated operational current (Ie) at AC-4, 660 V | |
| 690 V | 3.4 A |
| Rated operational current (Ie) at DC-1 | |
| 110 V | 20 A |
| Rated operational current (Ie) at DC-1 | |
| 12 V | 20 A |
| Rated operational current (Ie) at DC-1 | |
| 220 V | 20 A |
| Rated operational current (Ie) at DC-1 | |
| 24 V | 20 A |
| Rated operational current (Ie) at DC-1 | |
| 60 V | 20 A |
| Rated operational power at AC-3, 240 V | |
| 50 Hz | 2.5 kW |
| Rated operational power at AC-3, 380/400 V | |
| 50 Hz | 4 kW |
| Rated operational power at AC-3, 415 V | |
| 50 Hz | 4.3 kW |
| Rated operational power at AC-4, 220/230 V | |
| 50 Hz | 1.5 kW |
| Rated operational power at AC-4, 240 V | |
| 50 Hz | 1.8 kW |
| Rated operational power at AC-4, 415 V | |
| 50 Hz | 3.1 kW |
| Rated operational power at AC-4, 440 V | |
| 50 Hz | 3.3 kW |
| Rated operational power at AC-4, 500 V | |
| 50 Hz | 3 kW |
| Rated operational power at AC-4, 660/690 V | |
| Rated operational voltage (Ue) at AC - max | 690 V |
| Safe isolation | 300 V AC, Between coil and auxiliary contacts, According to EN 61140; 300 V AC, Between coil and contacts, According to EN 61140; 300 V AC, Between auxiliary contacts, According to EN 61140; 300 V AC, Between the contacts, According to EN 61140 |
| Features | Positive operating contacts to EN 60947-5-1 appendix L, including auxiliary contact module |
| Fitted with | Auxiliary contact |
| Number of poles | Three-pole |
| Application | Mini Contactors for Motors and Resistive Loads |
| Degree of protection | IP20 |
| Lifespan, mechanical | 7,000,000 Operations (Coil 50/60 Hz); 150,000 Operations (at 240 V, DC |
| L/R = 50 ms | 2 contacts in series 0.5 A); 10,000,000 Operations; 200,000 Operations (at 240 V, AC-15) |
| Mounting position | As required (except vertical with terminals A1/A2 at the bottom) |
| Operating frequency | 9000 mechanical Operations/h |
| Overvoltage category | III |
| Pollution degree | 3 |
| Product category | Contactors |
| Protection | Finger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274) |
| Rated impulse withstand voltage (Uimp) | 6000 V AC |
| Suitable for | Also motors with efficiency class IE3 |
| Utilization category | AC-3: Normal AC induction motors: starting, switch off during running; AC-4: Normal AC induction motors: starting, plugging, reversing, inching; AC-1: Non-inductive or slightly inductive loads, resistance furnaces |
| Voltage type | AC |
| Arcing time | 12 ms at 690 V AC |
| Changeover time | 16 - 21 ms |
| Duty factor | 100 % |
| Pick-up voltage | 0.8 - 1.1 V AC x Uc (voltage tolerance - single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz); 1.1 V AC x Uc (voltage tolerance - dual frequency coil 50/60 Hz) |
| Power consumption, pick-up | |
| 50 Hz | 25 VA, AC, Single-frequency coil 50 Hz and Dual-frequency coil 50/60 Hz; 22 W, AC, Single-frequency coil 50 Hz and Dual-frequency coil 50/60 Hz |
| Power consumption, pick-up | |
| 60 Hz | 25 VA, AC, Single-frequency coil 50 Hz and Dual-frequency coil 50/60 Hz; 22 W, AC, Single-frequency coil 50 Hz and Dual-frequency coil 50/60 Hz |
| Power consumption, sealing | |
| 50 Hz | 1.8 W, AC, Single-frequency coil 50 Hz and Dual-frequency coil 50/60 Hz; 4.6 VA, AC, Single-frequency coil 50 Hz and Dual-frequency coil 50/60 Hz |
| Power consumption, sealing | |
| 60 Hz | 1.8 W, AC, Single-frequency coil 50 Hz and Dual-frequency coil 50/60 Hz |
| Rated control supply voltage (Us) at AC | |
| 50 Hz - max | 110 V |
| Rated control supply voltage (Us) at AC | |
| 50 Hz - min | 110 V |
| Rated control supply voltage (Us) at AC | |
| 60 Hz - max | 120 V |
| Rated control supply voltage (Us) at AC | |
| 60 Hz - min | 120 V |
| Switching time (AC operated, make contacts, closing delay) - max | 21 ms |
| Switching time (AC operated, make contacts, closing delay) - min | 14 ms |
| Switching time (AC operated, make contacts, opening delay) - max | 18 ms |
| Switching time (AC operated, make contacts, opening delay) - min | 8 ms |
| Assigned motor power at 115/120 V, 60 Hz | |
| 1-phase | 0.5 HP |
| Assigned motor power at 200/208 V, 60 Hz | |
| 3-phase | 2 HP |
| Assigned motor power at 230/240 V, 60 Hz | |
| 1-phase | 1.5 HP |
| Assigned motor power at 230/240 V, 60 Hz | |
| 3-phase | 3 HP |
| Assigned motor power at 460/480 V, 60 Hz | |
| 3-phase | 5 HP |
| Assigned motor power at 575/600 V, 60 Hz | |
| Short-circuit current rating (basic rating) | 5 kA, SCCR (UL/CSA); 45 A, max. Fuse, SCCR (UL/CSA) |
| Short-circuit protection rating (type 1 coordination) at 500 V | 20 A gG/gL |
| Short-circuit protection rating (type 2 coordination) at 500 V | 10 A gG/gL |
| Switching capacity (auxiliary contacts, general use) | 10 A, 600 V AC, (UL/CSA); 0.5 A, 250 V DC, (UL/CSA) |
| Switching capacity (auxiliary contacts, pilot duty) | P300, DC operated (UL/CSA); A600, AC operated (UL/CSA) |
| Switching capacity (main contacts, general use) | 15 A, Maximum motor rating (UL/CSA) |
| Screw size | M3.5, Terminal screw |
| Screwdriver size | 0.8 x 5.5/1 x 6 mm, Terminal screw, Standard screwdriver; 2, Terminal screw, Pozidriv screwdriver |
| Stripping length (main cable) | 8 mm |
| Terminal capacity (flexible with ferrule) | 2 x (0.75 - 1.5) mm²; 1 x (0.75 - 1.5) mm² |
| Terminal capacity (solid) | 1 x (0.75 - 2.5) mm²; 2 x (0.75 - 2.5) mm² |
| Terminal capacity (solid/stranded AWG) | 18 - 14 |
| Tightening torque | 1.2 Nm, Screw terminals |
| MOQ | 1 |