Danfoss SVL-140B 100 multifunction valve body, angleway butt weld 100 mm (4 in), 140 bar CO2, steel (code 148B6918)

Danfoss SVL-140B 100 multifunction valve body for the 140 bar (2030 psig) SVL Flexline range for industrial R744 (CO2) sub- and trans-critical systems, code 148B6918. This is the bare valve housing (body only, no function module): it is welded or brazed permanently into the line and then given its duty — shut-off (SVA-140B) or strainer (FIA-140B) — by fitting the corresponding complete top part, which exchanges without cutting the body out of the line. This SKU is the angleway body with 100 mm (4 in) butt weld connections to ANSI B36.10 SCH80 / EN 10216-2. Single-flow body (embossed 1-way arrow); maximum working pressure 140 bar (2030 psig), maximum differential pressure 110 bar (1595 psig); media temperature range -40 to 150 C (-40 to 302 F). Housing and bonnet in low-temperature steel to the requirements of the Pressure Equipment Directive; CE marked. Angleway bodies place the inlet and outlet at 90 degrees. Order the matching SVA-140B or FIA-140B function module separately for the required duty.

Danfoss SVL-140B Flexline multifunction valve body for 140 bar CO2 service. Select by nominal size (SVL-140B 100), body direction (angleway) and connection (100 mm (4 in) butt weld, ANSI B36.10 SCH80 / EN 10216-2). The same body accepts an SVA-140B shut-off or FIA-140B strainer top part, so the duty is set by the module fitted, not by the body. Butt-weld and brazed housings are separate codes and are not interchangeable; EN and ANSI/ASME connection standards are also separate codes — confirm the mating pipe standard before ordering. The 140 bar CO2 range is distinct from the 52/65 bar SVL family and its parts are not interchangeable.

Type	Multifunction valve body, SVL-140B 100 (SVL Flexline, 140 bar CO2)
Code number	148B6918
Series	SVL-140B Flexline (multifunction valve body / housing)
Function	Bare valve body — accepts SVA-140B (shut-off) or FIA-140B (strainer) function module
Nominal size	SVL-140B 100
Direction	Angleway
Flow direction	Single-flow (embossed 1-way arrow)
Connection standard	ANSI B36.10 SCH80 / EN 10216-2
Connection size	100 mm (4 in)
Connection type	Butt weld
Body material	Low-temperature steel
Connection material	Steel
Maximum working pressure	140 bar (2030 psig)
Maximum differential pressure	110 bar (1595 psig)
Media temperature range	-40 to 150 C (-40 to 302 F)
Applicable media	R744 (CO2), sub- and trans-critical
CE mark	Yes
Approvals	C UL US LISTED, CE, CRN
Net weight	10.1 kg
Gross weight	11.65 kg
EAN	5715162685259

Material	Low-temperature steel
Pressure rating	140 bar
Temperature range	-40 to 150 C
Standard size	100 mm (4 in)
MOQ	1

Technical Specifications

Properties

Compatibility

Approvals

Attached Documents