Danfoss MBT 5560 insertion temperature transmitter, code 084Z4094 (type designation MBT 5560-0000-0080-30-115). Compact temperature sensor with an integrated 2-wire, loop-powered transmitter that converts the resistance of a built-in Pt 1000 platinum element into a standardized 4-20 mA signal, so a defined temperature is transmitted directly without a separate head or rail transmitter. For engine cooling water, lubricating and hydraulic oil, compressor, refrigeration and HVAC/R circuits, and marine and industrial plant. Insertion length 80 mm; G 1/4 male (ISO 228-1-A) process connection; AISI 316 Ti stainless-steel protection tube, 8 mm dia. Element measuring range -50 to +200 C (-58 to +392 F). Output 4-20 mA (2-wire) over a 0 to +150 C span; supply 10-32 V DC. Electrical connection: Angular connector, M20 (EN 175301-803-A), male and female. IP65 enclosure per IEC 60529. The built-in transmitter is factory-scaled to a 0 to +150 C output span. Supplied in a 13-piece multipack. CE marked.
| Type | MBT 5560 temperature sensor with built-in transmitter |
| Type designation | MBT 5560-0000-0080-30-115 |
| Code number | 084Z4094 |
| Sensor element | Pt 1000 platinum resistance (1000 ohm at 0 C), EN 60751 |
| Transmitter accuracy | < ±1% FS |
| Measuring range (element) | -50 to +200 C (-58 to +392 F) |
| Output signal | 4-20 mA (2-wire, loop-powered), transmitter setting range 0 to +150 C |
| Supply voltage | 10-32 V DC |
| Insertion length | 80 mm |
| Process connection | G 1/4 male (ISO 228-1-A) |
| Protection tube | AISI 316 Ti stainless steel, 8 mm dia. |
| Electrical connection | Angular connector, M20 (EN 175301-803-A), male and female |
| Enclosure rating | IP65 per IEC 60529 |
| Packing quantity | 13 pc (multipack) |
| Net weight | 0.142 kg |
| Approvals | CE |
| EAN | 5702423244430 |
| Product group | Sensors |
| Ambient temperature max. [°C] | 85 °C |
| Ambient temperature max. [°F] | 185 °F |
| Approval | CE |
| CE mark | Yes |
| China RoHS compliance | Out of scope |
| Connection material | AISI 316 Ti |
| Connection standard | ISO 228 |
| Connection type | G |
| EEE category | 5 small equipment (any external dimension < 50 cm) |
| Electrical conn | |
| Male/Female | Male and Female |
| Electrical connection size | M20 |
| Electrical connection standard | EN 175301-803-A |
| Enclosure rating IP | IP65 |
| EU RoHS compliance | Yes with exemptions |
| EU RoHS exemption clause | 6(c) |
| In scope of WEEE | No |
| Insertion length [in] | 3.15 in |
| Insertion length [mm] | 80 mm |
| Insertion type | Fixed |
| Output signal [mA] [max] | 20 mA |
| Output signal [mA] [min] | 4 mA |
| Process connection Male/Female | Male |
| Process connection material | Stainless steel |
| Process connection size | 1/4 |
| Process connection standard | ISO 228-1-A |
| Process connection type | G |
| Protection tube diameter [in] | 0.315 in |
| Protection tube diameter [mm] | 8 mm |
| Protection tube material | AISI 316 TI |
| REACH Candidate List substances | Lead (CAS no. 7439-92-1) |
| Sensor elem. resistance [Ohm] | 1000 Ohm |
| Sensor element tolerance | < ± 1% FS |
| Sensor element type | Pt |
| Sensor Insert | Fixed |
| Supply voltage [V] DC [max] | 32 V |
| Supply voltage [V] DC [min] | 10 V |
| Temperature range [°C] [max] | 200 °C |
| Temperature range [°C] [min] | -50 °C |
| Temperature range [°F] [max] | 392 °F |
| Temperature range [°F] [min] | -58 °F |
| Transmitter setting range [°C] [max] | 150 °C |
| Transmitter setting range [°C] [min] | 0 °C |
| Transmitter setting range [°F] [max] | 302 °F |
| Transmitter setting range [°F] [min] | 32 °F |
| Transmitter type | Integrated |
| Material | AISI 316 Ti stainless steel |
| Temperature range | -50 to +200 C (-58 to +392 F) |
| IP rating | IP65 |
| Standard size | 80 mm insertion |
| Thread standard | ISO 228-1-A |
| MOQ | 1 |
MBT 5560 sensor with factory built-in transmitter — the 4-20 mA (2-wire) 0 to +150 C span is preset by the type designation and is not field-rangeable on the standard version. Confirm the required insertion length (80 mm), process thread (G 1/4), electrical connector and supply match the pocket/thermowell and controller input before ordering. A matching thermowell can be ordered separately.