cBallast
Industrial Parts Catalog
Datasheet generated 2026-10-07
sales@cballast.com
cballast.com

Danfoss MBT 3560 temperature transmitter, Pt 1000 with built-in 0.5-4.5 V DC transmitter, 68 mm insertion, UNF 3/4-16 process connection (code 084Z4105)

Danfoss · Sensors & Instrumentation · Temperature Sensors · Denmark · danfoss.com
Part Number
084Z4105  ·  HS 9025.19
Danfoss MBT 3560 temperature transmitter, Pt 1000 with built-in 0.5-4.5 V DC transmitter, 68 mm insertion, UNF 3/4-16 process connection (code 084Z4105)

Danfoss MBT 3560 insertion temperature transmitter, code 084Z4105 (type designation MBT 3560-0200-0068-6A-815). Compact temperature sensor with integrated 2-wire transmitter that converts the resistance of a built-in Pt 1000 platinum element into a standardized 0.5-4.5 V DC (ratiometric) signal, so a defined temperature span is transmitted directly without a separate head or rail transmitter. For engine cooling water, lubricating and hydraulic oil, compressor and HVAC/R circuits, and marine and industrial plant. Insertion length 68 mm; UNF 3/4-16 male process connection (ASME B1.1); AISI 316 Ti stainless-steel protection tube, 8 mm. Measuring range -50 to +200 C (-58 to +392 F). Output 0.5-4.5 V DC (ratiometric); supply 9-30 V DC. Electrical connection: M12 x 1, 4-pin (IEC 61076-2-101). IP67 enclosure per IEC 60529. Supplied in a 13-piece multipack. CE marked.

Technical Specifications

TypeMBT 3560 temperature transmitter (sensor with built-in transmitter)
Type designationMBT 3560-0200-0068-6A-815
Code number084Z4105
Sensor elementPt 1000 platinum resistance (1000 ohm at 0 C), EN 60751
Measuring range-50 to +200 C (-58 to +392 F)
Output signal0.5-4.5 V DC (ratiometric)
Supply voltage9-30 V DC
Insertion length68 mm
Process connectionUNF 3/4-16 male, ASME B1.1
Protection tubeAISI 316 Ti stainless steel, 8 mm dia.
Electrical connectionM12 x 1, 4-pin (IEC 61076-2-101)
Enclosure ratingIP67 per IEC 60529
Net weight0.129 kg
Packing formatMulti pack (13 pc)
ApprovalsCE
EAN5702423267712
Product groupSensors
Ambient temperature max. [°C]85 °C
Ambient temperature max. [°F]185 °F
ApprovalCE
CE markYes
China RoHS complianceOut of scope
Connection materialStainless steel
Connection typeUNF
EEE category5 small equipment (any external dimension < 50 cm)
Electrical conn
Male/FemaleMale
Electrical connection size4 pin
Electrical connection standardIEC 61076-2-101
Enclosure rating IPIP67
EU RoHS complianceYes with exemptions
EU RoHS exemption clause6(c)
In scope of WEEEYes
Insertion length [in]2.68 in
Insertion length [mm]68 mm
Insertion typeFixed
Measuring range [°C] [max]150 °C
Measuring range [°C] [min]-40 °C
Measuring range [°F] [max]302 °F
Measuring range [°F] [min]-40 °F
Output signal [V] [max]4.5 V
Output signal [V] [min]0.5 V
Process connection Male/FemaleMale
Process connection materialStainless steel
Process connection size3/4-16
Process connection standardIASME B1.1
Process connection typeUNF
Protection tube diameter [in]0.315 in
Protection tube diameter [mm]8 mm
Protection tube materialAISI 316 TI
REACH Candidate List substancesLead (CAS no. 7439-92-1)
Sensor elem. resistance [Ohm]1000 Ohm
Sensor element tolerance< ± 1% FS
Sensor element typePt
Sensor InsertFixed
Supply voltage [V] DC [max]30 V
Supply voltage [V] DC [min]9 V
Temperature range [°C] [max]200 °C
Temperature range [°C] [min]-50 °C
Temperature range [°F] [max]392 °F
Temperature range [°F] [min]-58 °F
Transmitter setting range [°C] [max]150 °C
Transmitter setting range [°C] [min]-40 °C
Transmitter setting range [°F] [max]302 °F
Transmitter setting range [°F] [min]-40 °F
Transmitter typeIntegrated

Properties

MaterialAISI 316 Ti stainless steel
Temperature range-50 to +200 C
IP ratingIP67
Standard size68 mm insertion
Thread standardASME B1.1
MOQ1

Compatibility

MBT 3560 sensor with factory built-in transmitter — the 0.5-4.5 V DC (ratiometric) span is preset by the type designation and is not field-rangeable on the standard version. Confirm the required insertion length (68 mm), process thread (UNF 3/4-16), output (0.5-4.5 V DC (ratiometric)) and supply (9-30 V DC) match the pocket/thermowell and controller input before ordering. A matching thermowell can be ordered separately.

Standards

Approvals

Attached Documents