The valve Type 6223 can be used for the control of larger flow quantities. Low hysteresis, high reproducibility and good response sensitivity guarantee good positioning behaviour. The valve closes tight. The push-over coil is easy to replace.
The valve Type 6223 can be used for the control of larger flow quantities. Low hysteresis, high reproducibility and good response sensitivity guarantee good positioning behaviour. The valve closes tight. The push-over coil is easy to replace.
| Seal | FKM, others on request |
| Body | Brass, stainless steel on request |
| Hysteresis | < 5 % |
| Repeat accuracy | < 1 % FS |
| Response sensitivity | < 1 % FS |
| Setting range | 1:10 |
| Pressure range | 0.5…10 bar |
| Duty cycle | 100 % continuous operation |
| Operating voltage | 24 V DC (12 V on request) |
| PWM frequency | 280 Hz |
| Medium temperature | - 10 °C…+ 90 °C |
| Viscosity | Max. 21 mm2/s (21 cSt) |
| Electrical connection | Plug contacts according to DIN EN 175301 - 803 form A for cable plug Type 2518 . |
| Port connection | G ⅜, G ½, G ¾, G 1 |
| Degree of protection | IP65 |
| MOQ | 1 |