Type 6212 is a pilot-operated 2/2-way solenoid valve with servo diaphragm. The actuator is separated from the medium by a separating diaphragm. This allows use with slightly aggressive media. The housing program includes brass, stainless steel and plastic. The valve requires little electrical power, is lightweight and has a compact design. The special design and geometry of the valve internal parts ensure a soft closing function with only very low pressure peaks.
| Seal | NBR, EPDM, FKM |
| Pilot flange body | PPS |
| Body | Brass, stainless steel, PPE/PA |
| Housing cover | Stainless steel, PPE/PA |
| Orifice | DN 10…DN 20 |
| Duty cycle | 100 % continuous operation (with 24 V/DC) |
| Switching time | Opening: 0.1…0.5 sec |
| Operating voltage | 24 V/DC (further voltages on request) |
| Power consumption | 3.4 W |
| Voltage tolerance | ± 10 % |
| Operating medium | Neutral and slightly aggressive, gaseous and liquid mediums that do not attack the housing and sealing |
| Viscosity | Max. 21 mm2/s |
| Electrical connection | Plug contacts according to DIN EN 175301 - 803 form C for cable plug Type 2516 . |
| Port connections | G ¼ ...G 1 (NPT on request) |
| Degree of protection | IP65 with cable plug |
| MOQ | 1 |