The direct-acting rocker solenoid valve type 6106 is designed for use on neutral gaseous mediums. The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate. The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.
| Seal | FKM minimum bending radius: for Single bending: 8.5 mm Orifice: DN 0.9 and DN 1.2 (other orifices on request) Standard variant: Opening: approx. 25 ms (pressure build-up 0…10 %) Explosion-proof variant: Opening: approx. 25 ms (pressure build-up 0…10 %) Operating voltage: 12 V DC, 24 V DC (other voltages on request) Duty cycle: 100 % continuous operation Switching frequency: Approx. 16 Hz Voltage tolerance: ± 10 % Operating medium: Resistant to neutral gases (5 µm filtering) Medium temperature: - 10 °C…+ 55 °C Electrical connection: Plug contacts according to DIN EN 175301 - 803 form C for cable plug Type 2516 top/lateral Port connection: Bürkert sub-base (16 × 27 mm) Degree of protection: IP65 with flying leads or cable plug Type 2516 Ambient temperature: - 10 °C…+ 55 °C |
| MOQ | 1 |